16.05.001 Requirements for a complete application.
In addition to the requirements for a complete application as set forth in GHMC 19.02.002, an applicant for a preliminary plat shall submit the following:
A. A map or sketch using a scale of 100 feet to one inch or larger, showing:
1. Topographical and other data depicting:
a. Boundary lines including bearing and distance;
b. Easements, including location, width and purpose;
c. Streets on and adjacent to the tract, including name and right-of-way width and location; type, width and elevation of surfacing, walks, curbs, gutters, culverts, etc.;
d. Ground elevations on the tract, based on a datum plane approved by the city engineer; for land that slopes less than approximately two percent, show spot elevations at all breaks in grade, along all drainage channels or swales, and all selected points not more than 100 feet apart in all directions; for land that slopes more than approximately two percent, either show contours with an interval of not more than five feet if ground slope is regular and such information is sufficient for planning purposes, or show contours with an interval of not more than two feet if necessary because of irregular land or need for more detailed data for preparing plans and construction drawings;
e. Other conditions on adjacent land, including approximate direction and gradient of ground slope, including any embankments or retaining walls; character and location of buildings, railroads, power lines, towers, and other nonresidential land uses or platted land within 300 feet of the subject property. Refer to subdivision plat by name, recording date, volume and page number, and show lot size, and dwelling units;
2. Utilities on and adjacent to the tract, including location, size and invert elevation of sanitary, storm and combined sewers; location and size of water mains; location of gas lines, fire hydrants, electric and telephone poles, and street lights. If water mains and sewers are not on or adjacent to the tract, indicate the direction and distance to, and size of nearest ones, showing invert elevation of sewers;
3. Location of soil borings or test pits, as required;
4. Other conditions on the tract including critical areas and/or their buffers, watercourses, marshes, rock outcrop;
5. Zoning district designations, on and adjacent to the tract;
6. Proposed public improvements, including highways or other major improvements planned by public authorities for future construction on or near the tract;
7. Vicinity showing location of the tract;
8. Sites, if any, to be reserved or dedicated for parks, playgrounds, or other public uses;
9. Sites, if any, for multifamily dwellings, shopping centers, churches, industry or other nonpublic uses exclusive of single-family dwellings;
10. Minimum building setback lines;
11. Site data, including number of residential lots, typical lot size, and acres in parks, etc.;
12. Plat name, scale, north arrow and date;
13. Typical cross-sections of the proposed grading, roadway and sidewalk;
14. Proposed sanitary, storm water and water systems plan with points of connection, grades and sizes indicated;
B. Title and certificates, including a legal description according to official records in the office of the county auditor; pertinent survey data compiled as a result of a survey made by or under the supervision of a land surveyor registered in the state and engaged in land surveying which contains notation stating acreage, scale, north arrow, datum, bench marks, certification of registered civil engineer or surveyor, date of survey;
C. Draft of proposed covenants, if any; and
D. Public Works Checklist. All applicable items listed on the public works land use application intake checklist. (Ord. 1347 § 4, 2016; Ord. 1245 § 3, 2012; Ord. 701 § 2, 1996).